Disassembly E2
Removing and Replacing the Keypad Assembly
1.Remove the SD card, battery cover, battery, SIM, side bands, rear housing,
and transceiver PC board assembly as described in the procedures.
2.Beginning underneath the front housing, use the plastic disassembly tool to
push the keypad upward out of the front housing.
3.Lift the keypad assembly away from the front housing as shown in Figure 16.
KeypadFront housing
Display module
Disassembly
tool
051987o
Figure 16. Removing the Keypad Assembly
4.To replace, turn the front housing over so that the display lens is facing up.
34 March 27, 2006 6809497A99-O |