Disassembly E770v
Removing and Replacing the Acoustic Assembly
1.Remove battery cover, battery, SIM, rear housing, and main PCB assembly as
described in the procedures.
2. Use the disassembly tool to release the3 plastic catches that secure the acoustic
chamber assembly to the front housing.
Plastic Catches
Plastic Catch
051064o
Figure 9. Removing the acoustic assembly
3.To replace, align the acoustic assembly to the front housing.
4.Gently press the acoustic assembly onto the front housing until the catches on
the acoustic assembly are fully engaged.
5.Replace the main PCB assembly, metal shield, rear housing, SIM, battery, and
battery cover as described in the procedures.
28 August 23, 2005 6809495A80-O
PRELIMINARY |